Improved Answer/Ignore experience by enabling Voice Recognition as soon as prompt begins
Updated Mandarin voice prompt phrase for "ignore"
Added support for Plantronics Manager Pro with Plantronics Hub for iOS and Android

Resolved Issues

Play and pause button functionality on desktop media players
Japanese voice prompt for battery status
Improved PC call audio when in multi-point

Version 212
August 11, 2017

What’s new

Retune sidetone parameters
Supported by Plantronics Manager Pro
LED as solid blue after DFU success

Resolved Issues

Remove tone before voice prompt "volume max/min"
Fixed issue where HS LED will flash when battery critical status even the HS is power off
Fixed an issue where volume would jump to a higher volume after pausing for a longer time

April 23, 2018

R.W. Sanders

OWC SSD Firmware

April 23, 2018

R.W. Sanders

This Firmware is for the following
OWC Mercury SSD Models:

Extreme Pro
Extreme Pro RE
Extreme Pro 3G
Extreme Pro 6G

Aura Pro*
Aura Pro MBA
Aura Pro 1.8
Aura Pro 6G

Electra 3G
Electra 6G*

Download for all OWC 6G SSDs*Not including 960GB models

Please read all instructions below carefully before proceeding for information that may affect your specific computer.It is always highly recommended that you backup your data. Your data must exist in multiple locations to be qualified as having a backup. Anytime a drive is being updated, upgraded or moved, there is a potential for data loss. This update is non-destructive. While OWC has updated several drives with no data loss, we strongly recommended backing up all data on the SSD before performing this update.Instructions to verify your firmware version.

If your OWC SSD Firmware revision contains xxxA12F0 or xxxA13F0, then xxx365A12F0 or xxx365A13F0 is the most up-to-date revision, current as of October 20, 2011.

If your OWC SSD Firmware revision contains xxxABBF0, then 603ABBF0 is the most up-to-date revision, current as of March 30, 2015.

Intel based Mac. (Please see supported models below)
Wired USB Keyboard & Mouse
Internal or External CD/DVD Drive
Blank DVD media
OWC Mercury Electra* (3G, 6G), Extreme* (Pro, RE, 3G, 6G), or Aura* (Pro, MBA, 1.8, 6G) SSD.
*Not including 960GB models.

Be sure you have a backup of ALL critical data.
Download the image from the link above.
Verify what OWC SSD generation and firmware you are using by following the guidance in the link to the left.
Burn image to DVD. See support.apple.com/kb/ht2087 for instructions.
Insert the DVD into the Mac with the SSD to be updated.
Please power down and disconnect all external storage devices attached to your system.
Reboot the system while holding down the option key.
Select the Disc image labeled "Windows" and the utility will boot. Please be patient as it could take up to 5 minutes to load.
When the desktop loads, double click on the icon to begin.
Review and agree to the Software License Agreement.
The utility will automatically identify your drives.
Select the drive to be updated.
If your SSD requires an update click the Update button.
After the update is complete / successful you will be prompted to Shutdown.
At this point you can power up your machine and continue typical use.

Please ensure your Mac is compatible with this OWC SSD Firmware Updater by verifying your Model ID is listed below.
How to find your machine's model ID.

iMac
2006 - 2009

iMac4,1
iMac5,1
iMac6,1
iMac7,1
iMac8,1
iMac9,1
iMac10,1
iMac11,1

MacBook
2006 - 2007

MacBook1,1
MacBook2,1
MacBook3,1
MacBook4,1

MacBook Pro
2007 - 2008

MacBookPro2,1
MacBookPro2,2
MacBookPro3,1
MacBookPro4,1

Mac mini
2006 - 2007

Macmini1,1
Macmini2,1

Mac Pro
2006 - 2007

MacPro1,1
MacPro2,1

Aura, Mercury Electra and Mercury EXTREME are trademarks of New Concepts Development Corporation, registered in the U.S. Patent and Trademark Office. iMac, Mac, Mac Pro, MacBook, and MacBook Pro are trademarks of Apple Inc., registered in the U.S. and other countries. Other marks may be the trademark or registered trademark property of their owners.